CCNA 200-301 Practice Quiz – Router Basics

CCNA 200-301 quiz router basicsWelcome to CCNA 200-301 Practice Quiz on Router Basics. This quiz section provides you with multiple-choice questions with a single answer or multiple answers based on network devices.

The MCQ  quiz on router basics is very useful for the preparation of CCNA 200-301 certification,  CompTIA Network+ certifications, and many other competitive exams.

CCNA 200-301 Practice Quiz- Router Basics


1. Which of the following are the major components of the router? (Choose any three)

  1. ROM
  2. RAM
  3. NVRAM
  4. NVROM

A, B, and C are the correct answers.

2. Which of the following statements is not true about the functions of RAM in a router?

  1. RAM contains the running configuration.
  2. RAM stores routing table.
  3. It also stores the configuration register that determines the booting  mode of the router
  4. The content of RAM is erased, when the router is restarted.

is the correct answer.

3. Which of the following statements is true about the function of NVRAM in a router?

  1. It is a special type of RAM that stores information even after the router is shut down.
  2. The configuration files saved in NVRAM is called startup configuration.
  3. NVRAM stores the configuration register.
  4. All of the above

D is the correct answer.

4. Which of the following is true about the function of the router?  (Choose any three)

  1. The router connects different IP networks or IP sub-nets together for communication.
  2. It acts as a network traffic cop and filters the traffic based destination IP address.
  3. It does the function of a packet filtering firewall.
  4. It creates multiple collision domains and a single broadcast domain.

A, B, and C are the correct answers.
5. You are asked to configure the IP address to the serial 0/0 interface of the router. In which configuration mode, you need to issue the command to configure the IP address to the serial interface?

  1. Router(config-serial)#
  2. Router#
  3. Router(config-if)#
  4. Router(config-ip)#

C is the correct answer.
6. You purchased the new router. How the router boots up when it does not find any startup configuration?

  1. It will search the startup configuration in the TFTP server, if the configuration is not found then it will enter into the User Exec mode.
  2. It will search the startup configuration in Flash, if not found then will enter the setup mode.
  3. It will search the startup configuration mode in NVRAM. If the NVRAM is empty, then it will enter into the set-up dialog.
  4. None of the above

C is the correct answer.
7. What is the default value of the configuration register in the Cisco router?

  1. 0x2102
  2. 0x2142
  3. 0x2012
  4. 0x2412

A is the correct answer.

8. Which of the following  CLI command will display the name of all the IOS image files available in flash memory?

  1. #show flash
  2. #show protocols
  3. #show IOS 
  4. #show image

is the correct answer.
9. What is ROMMON mode in the Cisco router?

  1. It is the temporary storage for the IOS image.
  2. It is a memory management tool.
  3. It is the bootstrap code stored in ROM that initializes the booting process of the router and helps in the password recovery procedure. 
  4. None of the above.

C is the correct answer.
10.You want to execute the “enable” command to switch from user exec mode to privileged exec mode. What is the current router prompt is displayed on the screen at this point?

  1. #
  2. >
  3. $
  4. %

B is the correct answer.

11. Which of the following command is not the correct way to execute CLI command to copy content from RAM to NVRAM?

  1. copy running-config startup-config
  2. copy run start
  3.  copy RAM NVRAM
  4. write memory

C is the correct answer.

12. You want to upgrade the existing IOS image with a new image from the TFTP server. What command will you execute to download the new IOS image to your router? 

  1. Router#copy tftp flash
  2. Router#copy flash tftp
  3. Router#copy start flash
  4. Router#copy run flash

A is the correct answer.
13. Which of the following shows the problem in layer 1, when you issue the “show IP interface” command?

  1. Serial 0/1 is up, line protocol is down
  2. Serial 0/1 is down, line protocol is down
  3. Serial 0/1 is administratively down, line protocol is down
  4. Serial 0/1 is administratively down, line protocol is up

C is the correct answer.
14. The command “show cdp neighbors” provide the information regarding _____________ layers.

  1. Transport
  2. Datalink
  3. Application
  4. Network

D is the correct answer.

15. You want to set some informative messages for administrators, when the router boots up, what command will you issue?

  1. banner motd
  2. message motd
  3. banner message motd
  4. message banner motd

A is the correct answer.

16. The following command on a Cisco router will display the configurable parameters and statistics of all communication interfaces.

  1. show versions
  2. show interfaces
  3. show running-config 
  4. show startup-config

B is the correct answer.
17. The following command is issued to configure all the default VTY ports on a router.

  1. Router#line vty 0 4
  2. Router(config)#line vty 0 4
  3. Router(config)#line vty all
  4. Router#line vty all

B is the correct answer.

18. By default, Cisco router supports _________ simultaneous Telnet session.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

E is the correct answer.

19. When you erase all the contents of NVRAM and reboot the router, in what mode does it reboot again?

  1. Privileged mode
  2. Setup mode
  3. user exec mode
  4. ROMmon mode

B is the correct answer.

20. Which of the following command is used to issue the secret password ***** to go from user mode to privileged mode?

  1. Router(config)#enable secret *****
  2. Router(config)#enable password *****
  3. Router(config)#enable secret password *****
  4. Router#enable secret password *****

A is the correct answer.

 


Recommended MCQ Quizzes

MCQ – Computer Networking

MCQ – Computer Hardware

MCQ – Network Security

MCQ – Computer Fundamentals

 

Leave a Reply

Your email address will not be published. Required fields are marked *